When your furnace won't start, shuts off, or blows cool air, you need heat restored and a clear answer about why. Black Lion Heating & Air Conditioning provides furnace repair for Kirkland, WA, homeowners, from no-heat calls and blower problems to ignition failures, thermostat issues, and unusual noises. Our licensed technicians find the cause, explain what they found, and go over your repair options before any work begins. We also offer furnace maintenance, along with our Black Lion Annual Maintenance plan, to help you avoid breakdowns during the heating season.
Furnace not working? Call (425) 243-9751 or request service online to schedule furnace repair in Kirkland.
WA Contractor License BLACKLH873QQ | Google Rating 4.5 from 718 Reviews | Furnace Repair and Maintenance | Serving Kirkland and King County
A furnace that runs is not always a furnace that works well. Uneven rooms, rising energy bills, and new noises can be early warnings, and fixing a small problem early can keep it from turning into a full breakdown.
Furnace Repair Services in Kirkland, WA
Black Lion Heating & Air Conditioning repairs furnaces when they stop heating, heat unevenly, or run in ways that do not seem right. A repair visit starts with a diagnosis, because the same symptom can come from several different parts. A furnace that will not start, for example, may have a thermostat problem, a clogged filter, an ignition or flame sensing issue, or a control board fault. A furnace blowing cool air can point to ignition trouble, a safety switch that has shut the burners off, or a gas supply problem. Furnaces that shut off after a short run often have restricted airflow or a safety control responding to a problem. Our technicians trace the symptom to its cause, explain what they found, and review your options before starting the repair.
Common furnace repairs include:
- No heat or furnace won't start: Thermostat settings and wiring, power supply, igniters, flame sensors, and control boards.
- Furnace shuts off or short cycles: Restricted airflow, dirty flame sensors, and safety controls such as limit switches.
- Cool or lukewarm air: Ignition and burner problems, tripped safety switches, and gas supply issues.
- Weak or no airflow: Blower motor and capacitor problems, clogged filters, and airflow restrictions.
- Unusual noises: Worn blower parts, loose panels or components, and burner problems.
- Uneven heating: Airflow, blower, and thermostat issues.
Some symptoms are emergencies. If your carbon monoxide alarm sounds, move everyone out of the house and call 911 from outside. If you smell gas, leave the home and call your gas utility or 911 from outside. Do not restart a furnace you suspect is unsafe.
For everything else, call (425) 243-9751 or request service online and tell us what your furnace is doing.
Signs Your Furnace Needs Repair
Here are some common signs to watch out for that could indicate a furnace problem:
- Your furnace won’t turn on, or it turns on but then shuts off.
- No air is coming out from the vents when your furnace is on.
- Cool or lukewarm air is blowing out from the vents.
- Your carbon monoxide detector is going off.
- Your furnace is making unusual sounds.
- There is a concerning smell coming from your furnace.
- Your home struggles to remain warm.
- There are hot or cold spots throughout your Kirkland, WA, home.
- You notice condensation on windows or doors.
- Your energy bills have been increasing for no known reason.
Not sure what is causing the problem? Call (425) 243-9751 or request service online, and we will schedule a furnace repair visit to find out.
What to Expect During a Furnace Repair Visit
A technician starts by asking what you have noticed, such as when the problem started and what the furnace is doing. From there they inspect the furnace, test the parts involved, and identify the cause. We explain what we found and what each repair option involves before work begins. After the repair, we test the furnace to confirm it is heating properly.
Furnace Repair or Furnace Replacement?
Most furnace problems can be repaired, and a single failed part on an otherwise reliable furnace is often worth fixing. If repairs keep coming back, the furnace struggles to heat your home, or a safety concern comes up, replacement may deserve a look. Black Lion Heating & Air Conditioning also installs furnaces, so we can walk you through both paths and let you decide with the full picture.

Contact Black Lion Heating & Air Conditioning for Furnace Repair by calling us at (425) 243-9751 or book online now!
Furnace Maintenance to Prevent Repairs
Scheduling a furnace tune-up in early fall gives a technician a chance to inspect the system and catch small problems before you need heat every day. Change your filter as your owner's manual directs, and more often if you have pets or allergies.
At Black Lion Heating & Air Conditioning, we offer a convenient Black Lion Annual Maintenance plan to fit your budget and needs. As a maintenance plan member, you’ll enjoy discounts on parts and labor, priority service, and other perks. Join today!
Furnace Repair FAQs for Kirkland, WA, Homeowners
Why won't my furnace start?
A furnace that will not start can have a thermostat problem, a tripped breaker, a dirty filter restricting airflow, a failed igniter or flame sensor, or a control board fault. Check that the thermostat is set to heat and that the furnace has power. If it still will not run, a technician can test the parts involved and find the cause.
Why is my furnace blowing cool air?
Cool or lukewarm air can come from an ignition or burner problem, a safety switch that has shut the burners off, a dirty filter, or a thermostat fan setting left on constant. If the thermostat is set correctly and the air stays cool, schedule a repair so a technician can look at the burners and controls.
Why does my furnace keep shutting off?
A furnace that runs briefly and then stops is often responding to restricted airflow, a dirty flame sensor, or a safety control that detects a problem. Replacing a clogged filter is a reasonable first step. If the cycling continues, call for a diagnosis, because repeated shutoffs put extra strain on the system.
What should I do if my carbon monoxide alarm goes off?
Get everyone, including pets, outside right away and call 911. Do not go back inside until emergency responders say it is safe. Once the home is cleared, have your furnace and other fuel-burning appliances inspected before you use them again.
What does furnace repair cost in Kirkland, WA?
The cost depends on what has failed, how hard the part is to reach, and whether replacement parts are needed. A technician has to diagnose the furnace before giving an accurate number. We explain what we find and go over your options before the repair begins.
Is it better to repair or replace a furnace?
It depends on what is wrong, how often the furnace has needed repairs, its age, and how well it heats your home. A single failed part on an otherwise reliable furnace often makes sense to repair. If problems keep returning, we can walk through both repair and replacement so you can decide with the full picture.
When should I schedule furnace maintenance before the Kirkland heating season?
Early fall is a good time, before you need heat every day. A tune-up gives a technician a chance to inspect the system and catch small problems while scheduling is easy. Change your filter as the owner's manual directs, and more often if you have pets or allergies.
Do you repair furnaces in Juanita, Totem Lake, Kingsgate, and Finn Hill?
Yes, we provide furnace repair across Kirkland, including Juanita, Totem Lake, Kingsgate, Finn Hill, and nearby neighborhoods, as well as throughout King County. Send us your address through the request form or call, and we will confirm we can reach you.

Schedule Furnace Repair in Kirkland, WA Today
If your Kirkland, WA, home's furnace is not working the way it should, don't wait for it to get worse. Call (425) 243-9751 or request service online, and a licensed technician will diagnose the problem and help you get your heat back.